On this page
- How the Natro Macro Gather Tab Is Laid Out
- The 17 Fields in the Field Dropdown
- The Save, Copy and Paste Buttons
- Pattern Settings: Shape, Length and Width
- Until: Gather Time and Bag Percentage
- Sprinkler Placement: Start Location and Distance
- Return to Hive: Walk, Reset and Whirligig
- Convert Settings That Affect Gathering
- Recommended Natro Macro Gather Setups
- Common Gather Tab Mistakes
- Getting the Most From Natro Macro Gathering
- FAQ
The Gather tab is where Natro Macro earns you honey. Other tabs interrupt or redirect gathering, but this one decides where you stand, how you move, how long you stay and how you get home. Get it right and a session runs for hours unattended. Get it wrong and you drift out of the field or convert half-empty bags.
Below is every control, its real default, what it does in the code, and the setups we use. New here? Start with how to install Natro Macro and set up the required Roblox and Windows settings first. Most gathering problems come from those two pages, not from this one.
How the Natro Macro Gather Tab Is Laid Out
The tab is a grid with three rows (gather slots 1, 2 and 3) and four column groups: Gathering, Pattern, Until and Sprinkler. Each row is a complete recipe for one field. The left column is labelled "Field Rotation" because the three slots are not three separate jobs. They are a rotation the macro walks through in order.
- Slot 1 always has a field. On a fresh install it is Sunflower.
- Slots 2 and 3 can be set to
None. On a fresh install both are None. - After each gather trip finishes, the macro moves to the next slot that is not None: 1, then 2, then 3, then back to 1. With only slot 1 filled, it simply returns to slot 1 every time.
The bottom bar shows Current Field with < and > arrows. That is the slot the macro will gather in next, and you can change it by hand before pressing F1.
One timing rule the tab does not show
If your current field is Mountain Top during the first 15 minutes of an hour (UTC), the macro skips to the next slot. The code comments call this the "mondo dangerzone", because Mondo Chick spawns on Mountain Top at the top of the hour. If you rotate Mountain Top and wonder why it is sometimes skipped, this is why.
The 17 Fields in the Field Dropdown
The field dropdown lists 17 fields: Bamboo, Blue Flower, Cactus, Clover, Coconut, Dandelion, Mountain Top, Mushroom, Pepper, Pine Tree, Pineapple, Pumpkin, Rose, Spider, Strawberry, Stump and Sunflower. The important detail is what happens when you pick one. Natro Macro does not keep your old pattern settings. It loads that field's field defaults into the slot: pattern, length, width, camera rotation, sprinkler spot and distance, invert options, gather time and bag percentage.
Here are the shipped defaults for every field from the source code, with the zone and nectar labels the Planters tab uses and the Field Booster the macro links to each field.
| Field | Zone (macro) | Nectar | Booster | Default pattern | Width | Camera | Sprinkler |
|---|---|---|---|---|---|---|---|
| Sunflower | Starting | Satisfying | Mountain | CornerXSnake (M) | 4 | None | Upper Left, 8 |
| Dandelion | Starting | Comforting | Mountain | CornerXSnake (M) | 6 | None | Upper Left, 10 |
| Mushroom | Starting | Motivating | Red | CornerXSnake (M) | 2 | None | Upper Left, 8 |
| Blue Flower | Starting | Refreshing | Blue | CornerXSnake (M) | 7 | Right x2 | Center, 1 |
| Clover | Starting | Invigorating | Mountain | Stationary (S) | 1 | None | Center, 1 |
| Spider | 5 bee | Motivating | Mountain | CornerXSnake (M) | 1 | None | Upper Left, 6 |
| Strawberry | 5 bee | Refreshing | Red | CornerXSnake (M) | 1 | Right x2 | Upper Right, 6 |
| Bamboo | 5 bee | Comforting | Blue | CornerXSnake (M) | 3 | Left x2 | Upper Left, 4 |
| Pineapple | 10 bee | Satisfying | Mountain | CornerXSnake (M) | 1 | None | Upper Left, 8 |
| Stump | 10 bee | Motivating | Blue | Stationary (S) | 1 | None | Center, 1 |
| Cactus | 15 bee | Invigorating | Mountain | Stationary (S) | 1 | None | Center, 1 |
| Pumpkin | 15 bee | Satisfying | Mountain | CornerXSnake (M) | 5 | Right x2 | Right, 8 |
| Pine Tree | 15 bee | Comforting | Blue | CornerXSnake (M) | 3 | Left x2 | Upper Left, 7 |
| Rose | 15 bee | Motivating | Red | CornerXSnake (M) | 1 | Left x4 | Lower Right, 10 |
| Mountain Top | 25 bee | Invigorating | None | CornerXSnake (M) | 3 | Left x4 | Lower Left, 5 |
| Coconut | 35 bee | Refreshing | None | CornerXSnake (M) | 3 | Right x2 | Right, 6 |
| Pepper | 35 bee | Invigorating | Red | CornerXSnake (M) | 5 | None | Upper Right, 7 |
Every field default also uses 10 minutes, 95% bag, Walk, Drift Comp off and Shift-Lock off; most tick Invert L/R. Treat them as your baseline and change one thing at a time.
Which field to pick
We stay away from guessing at game numbers here, because your best field depends on your hive colour, gear and quest needs. The macro's own logic gives a useful hint, though. When a Black Bear or Brown Bear quest asks for coloured pollen, Natro Macro picks the field from your "My Hive Has" bee count on the Settings tab:
- Red pollen: Pepper at 35+ bees, Rose at 15+, Strawberry at 5+, otherwise Mushroom.
- Blue pollen: Pine Tree at 15+ bees, Bamboo at 5+, otherwise Blue Flower.
- White pollen: Pineapple at 10+ bees, Spider at 5+, otherwise Sunflower.
Those ladders are a solid starting point for slot 1 too. If you need to compare field details, the Bee Swarm Simulator wiki's Fields page covers the game side.
The Save, Copy and Paste Buttons
Each slot has three small controls on the left that most players ignore. They are worth learning.
- Save field default icon. Clicking it asks: "Update [field] default settings with the currently selected settings? These will become the default settings when you change to this field. The macro will use the updated settings when gathering for Quests/Planters." Your changes are written to
settings\field_config.ini. This matters more than it looks, because quest gathering, planter gathering and boosted-field gathering all use field defaults, not your slot settings. - Copy. Puts the slot's settings on your clipboard as a short JSON string (field, pattern, size, width, invert, rotation, sprinkler, until values, return method, drift check).
- Paste. Reads that string back and validates every value. Sizes must be XS to XL, width 1 to 9, sprinkler distance 1 to 10, bag percent a multiple of 5. A badly formatted string shows "Your String Format is incorrect!"
Found a setup you like for Pine Tree? Press the save icon. From then on, every Brown Bear quest, Planters+ trip and boosted-field run in Pine Tree uses the same tuned pattern instead of the stock one.
Pattern Settings: Shape, Length and Width
The Pattern column has a dropdown, two small spinners and three checkboxes. The dropdown lists every .ahk file in your patterns folder. Natro Macro ships with 12: Auryn, CornerXSnake, Diamonds, Fork, Lines, Slimline, Snake, Squares, Stationary, SuperCat, XSnake and e_lol. Each one is described move by move in our Natro Macro patterns guide.
Length (size)
Length runs XS, S, M, L, XL. In the code it becomes a multiplier on every step of the pattern:
| Length | Multiplier | Use it when |
|---|---|---|
| XS | 0.25 | You want to stay tight around the sprinkler |
| S | 0.5 | Small fields or a Supreme Saturator setup |
| M | 1 (default) | Most fields, the tuned baseline |
| L | 1.5 | Large fields with no edge to fall off |
| XL | 2 | Only in big fields; drift risk rises fast |
Distances are converted to walking time using the Movement Speed on the Settings tab, so a wrong speed value makes every length wrong.
Width
Width runs 1 to 9 (default 3). It is passed to the pattern as the number of repetitions, and each pattern uses it differently. In Squares and Diamonds it is the number of growing loops. In Lines and Snake it is how many lines are walked in each direction. In CornerXSnake and Slimline it barely changes anything, which is why the field defaults set it to small numbers there.
Gather w/Shift-Lock
Turns Shift Lock on for the pattern and off afterwards. Leave it off unless a pattern author says otherwise; the stock patterns are tuned without it.
Invert F/B and L/R
Patterns are written with abstract keys: "toward front", "away from front", "toward left", "away from left". Ticking F/B swaps forward and back. Ticking L/R swaps left and right. That mirrors the whole pattern without editing a file. The common use is a sprinkler in an upper-left corner: the pattern needs to run away from that corner, and the field defaults handle it by ticking L/R.
Rotate Camera
Choose None, Left or Right and a count from 1 to 4. Before the pattern starts, the macro presses the camera-rotate key that many times; when gathering ends, it rotates back the same amount. Each press turns the camera one fixed step, which turns the whole pattern with it. Blue Flower, Strawberry, Pumpkin and Coconut default to Right x2; Bamboo and Pine Tree to Left x2; Rose and Mountain Top to Left x4.
There is one hidden interaction. In Pine Tree, Pineapple and Spider, a specific combination (sprinkler at Upper or Upper Left with Rotate Left x1) flags the run as "facing corner", and patterns such as Fork and e_lol adjust their first moves for it.
Drift Comp
Drift Comp (Field Drift Compensation) is on by default for all three slots, but off in every field default. The help text explains it: "Enabling this checkbox will re-align you to your saturator every so often by searching for the neon blue pixel and moving towards it. Note that this feature requires The Supreme Saturator, otherwise you will drift more." If you tick it without setting Sprinkler Type to Supreme on the Settings tab, the macro warns you at start. It is also skipped automatically for the Stationary pattern, since you are not moving.
Until: Gather Time and Bag Percentage
The Until column decides when a gather trip ends. It has two values, and whichever is reached first wins.
- Mins: a number up to four digits. Slot defaults are 20 for slot 1 and 15 for slots 2 and 3. Field defaults use 10.
- Pack%: 5 to 100 in steps of 5. Default 95.
The bag check is slightly forgiving. The macro reads a smoothed backpack value and ends the trip once it reaches your setting minus 2, so 95% triggers at about 93%. Before giving up, if you have a hotbar slot set to Microconverter on the Boost tab, the macro fires it (no more than once every 30 seconds) and keeps gathering instead of walking home.
A trip can also end early: a disconnect, death, night with Vicious Bee hunting on, Mondo time, a bug run or Beesmas machine ready (with Allow Gather Interrupt ticked), a quest step changing, or "Inactive Honey" (about 30 seconds of no honey, usually a frozen game). The Status box names the reason, for example "Ended Time 14:52 - Bag Limit - Return: Walk".
Picking good Until values
- Bag-limited (most players): keep 95% and set Mins high, such as 20 to 30. You go home exactly when full.
- Time-limited: if your bag rarely fills, use 10 to 15 Mins so you still convert the balloon regularly.
- Skip 100%. The check fires a couple of points early anyway, so 95% is the practical ceiling for most setups.
Sprinkler Placement: Start Location and Distance
When you arrive in a field, Natro Macro walks to a start location, places your sprinkler and begins the pattern from there. The Sprinkler column controls where.
- Start Location: Center, Upper Left, Upper, Upper Right, Right, Lower Right, Lower, Lower Left, Left. Default Center.
- Distance: 1 to 10 (default 10). This is how far toward that edge you walk, as a fraction of the field's size. The code holds a length and width for every field and multiplies it by Distance/10. Distance 10 walks the full offset; distance 1 barely leaves the middle.
The sprinkler is placed with the 1 key, so it must sit in hotbar slot 1. Your Sprinkler Type on the Settings tab (None, Basic, Silver, Golden, Diamond, Supreme; default Supreme) changes the placement routine. Basic and Supreme drop once. Silver, Golden and Diamond jump-place several sprinklers in a small spread around the start point. None skips placement entirely.
Changing Start Location without changing the pattern direction is the number one cause of field drift. If the sprinkler is in the upper-left corner, the pattern must run down and right, or you will walk off the edge. Use the Invert checkboxes to fix direction instead of guessing with a new pattern.
Return to Hive: Walk, Reset and Whirligig
"To Hive By" has two options: Walk (default) and Reset. The old "Rejoin" option was removed in v0.9.7.
- Walk: uses the field's walk-back path (the
wf-files in thepathsfolder), then finds your hive slot. During Beesmas, a Walk return after a full bag or time limit also stops at the Honey Wreath if that option is enabled. - Reset: resets your character so you respawn at your hive. It is often quicker from far fields, at the cost of walking past nothing on the way home.
- Whirligig: if a Boost tab hotbar slot is set to Whirligig, the macro uses it instead (at most every 3 minutes) and converts straight away. If it cannot see a Whirligig on your hotbar, the status shows "No Whirligigs".
Walk suits nearby fields; Reset helps if a long walk path keeps getting caught.
Convert Settings That Affect Gathering
Converting happens at the hive, and its settings live on the Settings tab, but they decide how much time each gather loop actually spends in the field.
- Backpack conversion: the macro presses the make-honey prompt and waits until the bag is empty, with a five-minute safety cap. If honey stops being made for about 30 seconds after the first minute, it reports "Inactive Honey" and moves on.
- Convert Balloon: Never, Every (N minutes, default 30), Always, or Gather (default). Gather empties the balloon after each normal gather trip, with a fallback every 45 minutes. Polar and Black Bear quest trips do not trigger it.
- Enzymes: with a hotbar slot set to Enzymes, the macro uses it while converting the balloon, no more than once every 10 minutes.
Recommended Natro Macro Gather Setups
These are starting points by hive size. Begin with the one that matches you, run it for an hour, then adjust.
Beginner setup (under 15 bees)
- Pick one field. Set slot 1 to the field matching your hive colour from the ladders above (Sunflower, Blue Flower or Mushroom at the start). Leave slots 2 and 3 as None.
- Keep the field defaults. Do not touch pattern, width or camera until you have watched a few trips.
- Set Until to 20 Mins and 95%. Your bag will fill first.
- Turn Drift Comp off unless you own the Supreme Saturator, and set the matching Sprinkler Type on the Settings tab.
- Return by Walk. Early fields are close to the hive.
Mid-game setup (15 to 35 bees)
- Slot 1: your main colour field (Rose, Pine Tree or Pineapple). Slot 2: optional second field of the same colour.
- Tick "Gather in Boosted Field" on the Boost tab so the macro jumps to any field you boost, using its saved field default.
- Save your tuned settings for each field with the save icon so quests and planters reuse them.
Advanced setup (35 bees, Supreme Saturator)
- One main field in slot 1, often Pepper for red or Pine Tree for blue, with Drift Comp on.
- Length S or M with a pattern that stays near the saturator, so the sprinkler stays under you for the whole trip.
- Pack% at 95, Mins at 15 to 20, a Microconverter slot on the Boost tab, and Convert Balloon on Gather.
- Consider Auto Field Boost if you have Field Dice and Glitter to spare; see the Boost tab guide first.
Common Gather Tab Mistakes
| Symptom | Likely cause | Fix |
|---|---|---|
| Character slowly walks out of the field | Pattern direction does not match sprinkler corner, or wrong Movement Speed | Toggle Invert L/R or F/B; re-enter your exact speed without Haste |
| Drift gets worse with Drift Comp on | No Supreme Saturator | Untick Drift Comp |
| Quests gather with a bad pattern | Quests use field defaults, not slot settings | Use the save field default icon |
| Trips end with "Inactive Honey" | Game frozen or lag | See troubleshooting |
Getting the Most From Natro Macro Gathering
The Gather tab rewards patience. Start from the field defaults, watch three or four full trips, then change one setting and watch again. Save what works with the field default icon so every part of Natro Macro uses it, and share good setups with the Copy button. Once gathering is steady, add the extras: planters for nectar, quests for rewards and collectibles and bug runs for everything else. When something looks wrong, the Status log on the Status tab and the official Natro Macro Discord are the fastest ways to find out why.
Frequently asked questions
What are the default gather settings in Natro Macro?
On a fresh install, slot 1 is Sunflower with the Squares pattern, length M and width 3, 20 minutes, 95% bag, return by Walk, sprinkler at Center with distance 10 and Drift Comp ticked. Slots 2 and 3 are None. As soon as you pick a field from the dropdown, the macro loads that field's own defaults instead, which mostly use CornerXSnake and 10 minutes.
How do I make Natro Macro rotate between fields?
Fill gather slots 2 and 3 with fields. After every gather trip, the macro moves to the next slot that is not None, in the order 1, 2, 3 and back to 1. You can see which slot comes next in the Current Field box at the bottom of the window and change it with the arrows before you start.
Should I use Pack% or Mins to end gathering?
Use both. Whichever limit is reached first ends the trip. Most players keep Pack% at 95 and set Mins high enough that the bag fills first. The macro actually stops at your bag value minus 2, and if you have a Microconverter on the Boost tab it uses that first and keeps gathering.
Why does my character drift out of the field?
Usually the pattern runs toward the field edge closest to your sprinkler, or your Movement Speed on the Settings tab is wrong. Try ticking Invert L/R or F/B, lower the length to S, and enter your exact speed without Haste. Drift Comp only helps if you own the Supreme Saturator and set it as your Sprinkler Type.
Do quests and planters use my Gather tab settings?
Mostly no. Quest, planter and boosted-field gathering use each field's saved field default. The only exception is a quest field that matches slot 1, which reuses slot 1's pattern. To make quests use your tuned pattern, set it up in a slot and click the save field default icon next to it.
What does Sprinkler Distance do?
Distance, from 1 to 10, sets how far from the field centre the macro walks toward your chosen Start Location before placing the sprinkler. The code multiplies the field's length and width by Distance divided by 10. Distance 10 reaches the full offset; distance 1 stays almost in the middle. The pattern starts from that same point.
Keep reading




