Natro Macro logoNatro MacroDownload

Guide

Natro Macro Quests Guide: Every Quest Giver Explained

What Natro Macro does for each of the six quest givers, how it picks quest fields, and every option on the Quests tab with its real default.

Natro Macro quests guide with a bear quest giver in Bee Swarm Simulator
On this page
  1. The Natro Macro Quests Tab
  2. How Natro Macro Runs Quests
  3. Polar Bear Quests
  4. Black Bear Quests
  5. Brown Bear Quests
  6. Honey Bee Quests
  7. Bucko Bee and Riley Bee Quests
  8. Petal Quests
  9. Natro Macro Questing Tips
  10. Recommended Quest Setups
  11. Common Quest Problems
  12. Getting Started With Natro Macro Quests
  13. FAQ

Quests are where a lot of Bee Swarm Simulator's best rewards come from, and they are also the most repetitive part of the game: read the objective, walk to the field, gather, kill a few mobs, walk back, turn in, repeat. Natro Macro automates six quest givers from one tab. It reads your quest log, works out which field or mob each objective needs, does the work and hands the quest in.

This guide explains what the macro does for each quest giver, every setting on the Quests tab with its default value, and the tips that keep questing from slowing your honey down. For the game side of each questline, the Bee Swarm Simulator wiki's Quests page is the place to look.

The Natro Macro Quests Tab

The tab has one box per quest giver and a small Settings box. Every quest giver starts disabled.

Quest giverOptions on the tabWhat the macro handles
Polar BearEnable, Allow Gather Interrupt (on)Field pollen and mob kills for each recipe quest
Honey BeeEnableDetects the Honey Hunt quest and turns it in
Black BearEnableColour or field pollen for repeatable quests
Brown BearEnableField or colour pollen read from the quest log
Bucko BeeEnable, Allow Gather Interrupt (on)Blue pollen, kills, Ant Challenge, Blue Booster, feeding
Riley BeeEnable, Allow Gather Interrupt (on)Red pollen, kills, Ant Challenge, Red Booster, feeding

Under each giver the tab shows live progress text, such as the current quest name and whether each objective is complete. On a fresh install it reads "Unknown" until the macro has opened your quest log once.

Quest settings

  • Gather Limit: 1 to 999 minutes, default 5. This is how long a single quest gather trip lasts before the macro goes home and re-checks the quest.
  • To Hive By: Walk (default) or Reset, used instead of the field's own return method during quest trips.
  • Use Boost Tab for Quests: off by default. When off, your Boost tab field boosters, Wind Shrine and the Gathering and GatherStart hotbar slots are held back while a quest field is active, so quest trips do not burn your boosts. Tick it if you want boosts used on quest fields too.

How Natro Macro Runs Quests

Quests are one step in the macro's main loop (QuestRotate in the default priority list). Each time it runs, the macro opens your quest log and checks the givers in a fixed order:

  1. Polar Bear is always checked first.
  2. Black Bear comes next if no field has been chosen yet.
  3. Bucko Bee, then Riley Bee, run when Black Bear is off or finished and waiting to turn in.
  4. Brown Bear is checked if none of the above set a field.
  5. Honey Bee is checked last.

The first quest that needs pollen sets a "quest gather field". On its next gather trip, the macro goes there instead of your Gather tab field. If that field matches your slot 1 field, it uses your slot 1 pattern settings. Otherwise it uses the field's saved field default, with your Gather Limit as the time and the quest's To Hive By setting. Every five seconds during the trip it re-reads quest progress, and if the objective is done or the needed field changes, the trip ends with the status "Next Quest Step".

Because quest trips use field defaults, tune your patterns on the Gather tab and press the save field default icon for every field your quests visit. It is the single biggest improvement you can make to questing.

Polar Bear Quests

Polar Bear quests are recipes that combine pollen from specific fields with mob kills. Natro Macro knows each recipe by name, including Aromatic Pie, Beetle Brew, Candied Beetles, Exotic Salad, Extreme Stir-Fry, High Protein, Ladybug Poppers, Mantis Meatballs, Prickly Pears, Pumpkin Pie, Scorpion Salad, Spiced Kebab, Spider Pot-Pie, Spooky Stew, Strawberry Skewers, Teriyaki Jerky, Thick Smoothie and Trail Mix, plus the petal recipes Petal Tabbouleh and Mashed Blooms.

  • Collect objectives become the quest gather field.
  • Kill objectives (Ladybugs, Rhino Beetles, Spider, Mantis, Scorpions, Werewolf) are passed to the bug run, even if you have not ticked those mobs on the Kill tab.
  • Allow Gather Interrupt (on by default) lets those kills interrupt a gather trip as soon as the mob is due, instead of waiting for the trip to end.

With Convert Balloon set to Gather, Polar and Black Bear quest trips do not trigger the after-gather balloon conversion, which keeps the questline moving. When a quest finishes, the macro walks to Polar Bear, turns it in, takes the next one and adds one to your Quests Done stat.

Black Bear Quests

Ticking Black Bear shows a warning: "This option only works for the repeatable quests. You must first complete the main questline before this option will work properly." Do the story quests by hand first.

The repeatable quests the macro recognises include Just White, Just Red, Just Blue, A Bit Of Both, Any Pollen, The Whole Lot, Between The Bamboo, Play In The Pumpkins, Plundering Pineapples, Stroll In The Strawberries, Mid-Level Mission, Blue Flower Bliss, Delve Into Dandelions, Fun In The Sunflowers, Mission For Mushrooms, Leisurely Lowlands, Triple Trek and Pepper Patrol. Field objectives go straight to that field. Colour objectives use your "My Hive Has" value from the Settings tab:

Colour35+ bees15+ bees10+ bees5+ beesFewer
RedPepperRoseStrawberryStrawberryMushroom
BluePine TreePine TreeBambooBambooBlue Flower
WhitePineapplePineapplePineappleSpiderSunflower

"Any" objectives are completed in whatever field you are already gathering. After a Black Bear quest is turned in, the macro waits an hour before handing in the next, and uses that time for Bucko and Riley quests.

Brown Bear Quests

Brown Bear support was added in v0.9.9. Brown Bear quests do not have fixed names the way Black Bear quests do, so the macro reads up to four objectives straight from the quest log by image. It recognises every one of the 17 fields plus red, blue and white pollen, and uses the same colour table as Black Bear. Like Black Bear, completed Brown Bear quests are turned in no more than once an hour.

Honey Bee Quests

Honey Bee is the simplest. The macro searches your quest log for the Honey Hunt quest and reads its progress bar ("Honey Tokens: Complete" or "Incomplete"). When it is complete, the macro travels to Honey Bee, turns it in and starts the next one. It does not chase honey tokens itself; normal gathering and the rest of your routine fill the quest over time.

Bucko Bee and Riley Bee Quests

Bucko Bee (blue) and Riley Bee (red) quests mix several kinds of objective, and the macro handles each type:

ObjectiveBucko BeeRiley Bee
Collect pollenBlue Flower, Bamboo, Pine Tree, blue or anyMushroom, Strawberry, Rose, red or any
KillRhino Beetles, MantisLadybugs, Scorpions, or all mobs (Rampage)
Get AntRuns an Ant ChallengeRuns an Ant Challenge
Get BoosterUses the Blue Field BoosterUses the Red Field Booster
FeedBlueberries (Picnic)Strawberries (Picnic)

When you enable either one, Natro Macro also switches on Ant Pass collection on the Collect/Kill tab and tells you why: "Ant Pass collection has been automatically enabled so the passes can be stockpiled for the 'Picnic' quest." The "Use Tickets" option on that tab lets the macro buy Ant Passes with Tickets when you run out and a quest needs ant kills.

Allow Gather Interrupt works the same as for Polar Bear: quest kills interrupt gathering when the mob comes off cooldown.

Petal Quests

Since v1.1.0 the macro detects petal quests from Polar Bear, Bucko Bee and Riley Bee. Enabling those givers shows a warning that is worth reading: the macro "will simply gather in the corresponding field, or the field with the highest concentration of a specific petal color", and "IT IS EXPECTED THAT PETAL QUESTS TAKE A LONG TIME, especially high-tier quests like Riley/Bucko at 250+ quests completed." If a petal quest is holding up the rotation, finishing it by hand is often faster.

Natro Macro Questing Tips

  • Set "My Hive Has" correctly on the Settings tab. Colour quests pick fields from it, and a wrong value sends you to fields you cannot reach.
  • Raise Gather Limit above the default 5 minutes once your bag is large. Short trips mean more walking.
  • Enable fewer givers at once if your honey per hour drops. Every quest steals gather time from your main field.
  • Keep Monster Respawn Time accurate on the Kill tab, so quest kills are attempted when mobs have actually respawned.
  • Turn on Discord reports to watch quest progress remotely; see the Discord bot guide.

How many givers to run depends on how much gather time you are willing to trade for quest rewards. These are the setups we use at each stage.

Early game (under 15 bees)

  • Enable Polar Bear and Honey Bee only. Both are low-maintenance and fit around a single gather field.
  • Leave Gather Limit at 5 minutes; small bags fill quickly anyway.
  • Tick the mobs you can safely kill on the Kill tab and keep Allow Gather Interrupt on.

Mid game (15 to 35 bees)

  • Add Black Bear once its main questline is done, and Brown Bear once you have access to it.
  • Raise Gather Limit to 10 or 15 minutes and save tuned field defaults for Rose, Pine Tree, Pineapple and the other fields your colour table sends you to.
  • Pick Bucko or Riley to match your hive colour, not both, so Ant Passes and boosters are not split between them.

Late game (35+ bees)

  • Run every giver you care about, with "My Hive Has" set to 35 or more so colour quests go to Pepper and the 35-bee zone.
  • Leave Use Boost Tab for Quests off unless your quest fields are also your main fields.
  • Expect petal quests to slow the rotation and step in by hand when they do.

Common Quest Problems

ProblemWhat to check
Progress stays "Unknown"The quest log must be readable: English Experience Language, Text Size lowest, nothing covering the top of Roblox (see Roblox settings)
Macro goes to a field you cannot enter"My Hive Has" on the Settings tab is set too high
Kill objective never finishesMonster Respawn Time too low, or the mob is too strong for your hive
Bucko or Riley stuck on an ant objectiveNo Ant Passes; enable Use Tickets on the Collect tab
Quests finish but honey per hour dropsToo many givers enabled, or Gather Limit too short

Still stuck? Copy a debug report with F6 and post it in the support channels of the official Natro Macro Discord.

Getting Started With Natro Macro Quests

Finish each main questline by hand, then enable one giver at a time and watch how it fits your routine. Polar Bear and Black Bear are the easiest to automate; Bucko and Riley need Ant Passes and boosters on hand; petal quests are slow by design. Save field defaults for every quest field, keep your bee count accurate and let Natro Macro handle the walking. If quests stop being detected, the troubleshooting guide covers the Roblox settings that affect quest-log reading, and the planters guide shows how to keep nectar going alongside your quests.

Frequently asked questions

Which quests can Natro Macro do?

Six quest givers: Polar Bear, Honey Bee, Black Bear, Brown Bear, Bucko Bee and Riley Bee. The macro gathers pollen in the right field, sends kill objectives to the bug run, runs Ant Challenges, uses field boosters, feeds berries for Picnic quests and walks to the quest giver to hand each quest in.

Why is Natro Macro not doing my Black Bear quest?

The Black Bear option only works for the repeatable quests. You must finish the main Black Bear questline by hand first, which the macro warns you about when you tick the box. Also note that completed Black Bear quests are turned in no more than once per hour, so it may simply be waiting.

What does Allow Gather Interrupt mean on the Quests tab?

It applies to Polar Bear, Bucko Bee and Riley Bee and is on by default. When a quest needs a mob killed and that mob is off cooldown, the macro stops the current gather trip and goes to kill it. With it off, quest kills wait until the gather trip ends normally.

Why are petal quests taking so long?

The macro has no special handling for petals. Since v1.1.0 it detects petal quests and simply gathers in the matching field or the field with the most of that petal colour. The in-app warning says these quests are expected to take a long time, especially for Riley and Bucko after 250 or more completed quests.

Should I tick Use Boost Tab for Quests?

Only if you want boosts spent on quest fields. With it off (the default), Boost tab field boosters, Wind Shrine and the Gathering and GatherStart hotbar slots are paused while a quest field is active. That saves your boosts for your main field, which is usually where they earn the most.

Keep reading