On this page
Planters are the part of Bee Swarm Simulator that rewards you for being away, and that makes them a perfect job for a macro. Natro Macro can place, track and harvest up to three planters while it gathers, either by following a schedule you write (Manual) or by deciding everything itself from your nectar levels (Planters+).
This guide covers the whole Planters tab: both modes, every option name and default from the source code, the Planter Timers window and the Discord commands that go with it. Planter gathering borrows your field defaults, so it helps to have read the Natro Macro gather settings guide first.
The Natro Macro Planters Tab at a Glance
The top-right slider has three positions: OFF, MANUAL and + (Planters+). It is OFF on a fresh install. The rest of the tab changes completely depending on the mode you choose, and only one mode runs at a time.
| Manual | Planters+ | |
|---|---|---|
| Who picks planter and field | You, cycle by cycle | The macro, from nectar priorities |
| Planter slots | 3 slots, up to 9 cycles each | Up to 3 (Max Planters) |
| Harvest timing | Timed (Harvest every 30 mins to 6 hours) or Full | Harvest Every N hours, Auto or Full Grown |
| Glitter | Optional per cycle | Not used |
| Hold planters for Puffshrooms | Yes (Disable Auto-Harvest) | No |
| Best for | Specific goals, loot farming, smoking planters | Hands-off nectar management |
Both modes use the same 12 planters (Plastic, Candy, Blue Clay, Red Clay, Tacky, Pesticide, Heat-Treated, Hydroponic, Petal, Planter of Plenty, Paper and Ticket) and the same 17 fields. The macro travels to each field with its own planter paths, the gtp- files in the paths folder.
Nectars and Fields in Natro Macro
Everything in Planters+ revolves around the five nectars, and the macro links every field to one of them. This mapping comes straight from the code and is printed on the tab as short labels such as "Dandelion (COM)".
| Nectar | Fields (zone) |
|---|---|
| Comforting (COM) | Dandelion (starting), Bamboo (5 bee), Pine Tree (15 bee) |
| Refreshing (REF) | Blue Flower (starting), Strawberry (5 bee), Coconut (35 bee) |
| Satisfying (SAT) | Sunflower (starting), Pineapple (10 bee), Pumpkin (15 bee) |
| Motivating (MOT) | Mushroom (starting), Spider (5 bee), Stump (10 bee), Rose (15 bee) |
| Invigorating (INV) | Clover (starting), Cactus (15 bee), Mountain Top (25 bee), Pepper (35 bee) |
The zone labels matter. The macro uses your "My Hive Has" value from the Settings tab to know which areas you can reach, so keep that number accurate. For the game-side details of each planter, the Bee Swarm Simulator wiki's Planters page is the reference.
Planters+ Mode: Every Setting
Planters+ is the automatic mode. You tell it which nectars matter most and which planters and fields it may use, and it handles placing, harvesting and moving planters around to keep those nectars topped up.
Presets
"Presets:" offers Custom, Blue, Red and White, with Blue as the default. Choosing Blue, Red or White fills in the five nectar priorities, their Min % values and a set of allowed fields in one click. Any manual change is your own setup; switch to Custom to make that clear.
| Preset | Priority 1 (Min 70%) | Priorities 2 to 4 (Min 80%) | Priority 5 (Min 40%) |
|---|---|---|---|
| Blue | Comforting | Motivating, Satisfying, Refreshing | Invigorating |
| Red | Invigorating | Refreshing, Motivating, Satisfying | Comforting |
| White | Satisfying | Motivating, Refreshing, Comforting | Invigorating |
Each preset also changes Allowed Fields. All three leave Mushroom, Stump, Coconut and Mountain Top unticked. Blue also leaves out Bamboo and Pumpkin; White leaves out Pumpkin; Red leaves out Clover.
Nectar Priority and Min %
Five priority rows each pick a nectar (or None), and each row has a "Min %" from 10 to 90. Priority order tells the macro which nectar to work on first. Min % is the level you want that nectar kept at. When the macro places a planter, it estimates how much nectar the planters already in the ground will add and works out how long the new planter should stay to reach your Min %.
Harvest Every, Auto and Full Grown
Three ways to time harvests, and only one can be active:
- Harvest Every N Hours (default 2): each planter is harvested after N hours, or sooner if the planter would be fully grown first.
- Auto: the macro calculates a separate interval for each planter from your current nectar percentage, the planter's nectar and growth bonuses and your Min %. It also pulls planters early if that nectar is about to overfill, for example when it is already above 99%.
- Full Grown: every planter stays until it is fully grown. The tab shows [Full] in red when this is on, and [Auto] for Auto.
Auto is the best choice for most players. Full Grown suits planters you mainly use for loot rather than nectar.
Only Gather in Planter Field
When ticked, the macro gathers in the fields where your planters sit instead of the fields on your Gather tab, using each field's saved default settings. It trades your chosen gather field for time spent in the fields your planters are working on.
Gather Field Nectar Sipping
This option looks at the nectar of the field you are gathering in. If a planter collecting that same nectar is sitting in a different field, the macro marks it for harvest early so the next planter of that nectar can go where you are actually gathering. It does nothing when Full Grown is selected. Leave it off unless you gather in one main field and want planters to follow you there.
Allowed Planters and Max Planters
Tick the planters you own and are happy for the macro to use. On a fresh install Plastic, Candy, Blue Clay, Red Clay, Tacky and Pesticide are ticked; Heat-Treated, Hydroponic, Petal, Planter of Plenty, Paper and Ticket are not. "Max Planters" (0 to 3, default 3) caps how many are in the ground at once.
Only tick planters you actually have. If the macro tries to place one you do not own it will waste trips, and if it finds three planters already placed it reports "3 Planters already placed! MaxAllowedPlanters has been reduced." Clear old planters by hand before switching to Planters+.
Allowed Fields
The field list is grouped by zone, each with its nectar label. Untick fields you cannot reach yet or do not want planters in. Fields with Mondo, Vicious Bee or heavy mob traffic are worth leaving out until your hive can handle them.
Manual Planters Mode
Manual mode, reintroduced in v0.9.1, turns the tab into a scheduler. You have three planter slots, and each slot can hold up to nine cycles across three pages. A cycle is a planter, a field, an optional Glitter tick and a harvest type. When a cycle is harvested, the slot moves on to its next cycle.
- Switch the slider to MANUAL.
- Fill cycle 1 for each slot. Pick a planter and a field. Leave Full/Timed on Timed (the default) to use the harvest interval.
- Add more cycles on pages 2 and 3 if you want each slot to rotate through different fields.
- Set "Harvest every" to 30 mins or 1 to 6 hours. The default is 2 hours.
- Check Current Cycle for each slot, then start the macro.
If a cycle's field or planter is already used by another slot, the macro skips to the next cycle automatically so it never tries to place two planters in one field or the same planter twice. Your schedule is saved in settings\manual_planters.ini.
Full vs Timed and the Glitter option
Timed harvests after your "Harvest every" interval. Full waits until the planter is fully grown. Ticking Glitter on a cycle makes the macro drag a Glitter from your inventory onto the field right after placing the planter, as long as no Glitter has been used in the last 15 minutes. The macro then shortens that planter's remaining timer by a quarter.
Disable Auto-Harvest (smoking planters)
This option exists for players growing smoking planters for Puffshrooms. Tick it for any of slots 1 to 3, and the macro will not harvest that planter. It "holds" it until you harvest and clear it yourself, so you can check whether it is smoking first. The in-app help explains the workflow:
- Harvest manually in game, clear the planter in the Planter Timers window (F5), and press + on the Planters tab to move to the next cycle.
- Or leave it alone if it is smoking and you want to keep holding it.
- With remote control set up, use
?planter smoking [n]to mark it, or?planter harvest [n]to release it.
Turning the option off, or switching to Planters+, makes the macro harvest anything it was holding.
Gather in Planter Fields
Pick which slots you want to gather in, and the macro gathers in those planter fields instead of your Gather tab fields. With more than one slot ticked it rotates between them. If no ticked slot has a planter, or all are being held, it falls back to your normal Gather tab fields. While gathering this way it checks planter progress every two minutes and stops when one is ready to harvest.
Harvest Options in Both Modes
- Convert Full Bag Harvest (default off): if your bag is at 95% or more after a harvest, the macro walks straight back to the hive instead of heading to its next job.
- Gather Planter Loot (default on): after harvesting, the macro walks a short loot route over the field to pick up what the planter dropped. Turn it off only if you are short on time and only care about nectar.
Both options exist separately for Manual and Planters+, so set them in whichever mode you use.
The Planter Timers Window (F5)
Press F5, click "Show Timers" on the Planters tab, or use the tray menu to open the separate timers window (titled "Timers Revision 4.0"). It stays on top of Roblox and remembers whether you left it open.
- Planter columns: the planter, field, nectar and time until harvest for each of the three slots, with buttons for Ready, Add/Clear, -1HR and +1HR.
- Blender and Wind Shrine: the items queued on the Collect/Kill and Boost tabs, with their own Ready and amount buttons.
- Mob and boss timers plus a transparency slider.
Use the Ready button when you harvested a planter yourself and want the macro to know. Use -1HR and +1HR to correct a timer after a disconnect.
Planter Commands on Discord
If you set up bot mode in the Natro Macro Discord bot guide, you can manage planters from your phone:
| Command | What it does |
|---|---|
?planters | Overview with images, field, nectar, time left and glitter |
?planter harvest [n] | Harvest or release slot n |
?planter add [h:m:s] [n] | Add time to a slot's timer |
?planter sub [h:m:s] [n] | Subtract time |
?planter clear [n] | Clear a slot |
?planter smoking [n] | Mark a held planter as smoking |
?planter screenshot [n] | Screenshot a planter |
In the Discord settings window you can also turn on Planter screenshots and a ping for Phantom planters.
How Planters Fit Into the Macro Loop
Natro Macro works through a fixed priority list every loop. By default it is Night, Mondo, Planter, Bugrun, Collect, QuestRotate, Boost and finally GoGather. Planters sit third, so a planter that is due gets harvested before bug runs, collectibles, quests or the next gather trip. You can reorder that list on the hidden Advanced tab, covered in the settings and hotkeys guide, but the default order is sensible for almost everyone.
A few interactions are worth knowing:
- Night, Mondo and boosted fields come first. Planters+ waits if night (with Vicious Bee hunting on), Mondo time or an active field boost is in progress.
- Auto Field Boost protects your multiplier. If Auto Field Boost last boosted your field with Dice, Planters+ skips its turn between roughly 6 and 15 minutes after that boost so a planter trip does not cost you the stack.
- Disconnects keep timers. Planter data is saved in
settings m_config.ini, so after a reconnect the macro still knows what is in the ground. Check the timers window anyway.
Planter paths assume correct display and Roblox settings, just like gather paths. If the macro keeps reporting "Failed to place planter in 10 tries!", check your Roblox settings first, then ask in the official Natro Macro Discord.
Which Natro Macro Planter Mode Should You Use?
Pick Planters+ with a preset matching your hive colour and Harvest on Auto if you want nectars managed without thinking about them. Pick Manual when you have a plan: farming loot in specific fields, using Glitter on certain planters, or growing smoking planters for Puffshrooms. Either way, tick only planters and fields you really have access to, keep Gather Planter Loot on, and check the timers window after any disconnect. If planters are being placed in the wrong spot, the Natro Macro troubleshooting guide covers the display and Roblox settings that throw paths off.
Frequently asked questions
What is the difference between Manual and Planters+ in Natro Macro?
Manual follows a schedule you build: three slots, up to nine cycles each, with your choice of planter, field, Glitter and harvest type. Planters+ decides everything itself from your nectar priorities, Min % values, allowed planters and allowed fields. Manual gives control; Planters+ gives hands-off nectar management. Only one mode runs at a time.
Which Planters+ preset should I use?
Match your hive. The Blue preset puts Comforting first, Red puts Invigorating first and White puts Satisfying first, each with Min % values of 70, 80, 80, 80 and 40. Every preset also ticks a set of allowed fields. Start from the preset, then untick any planters or fields you cannot use and the tab is ready.
What does Auto harvest do in Planters+?
Auto works out a separate harvest time for each planter from your current nectar level, that planter's nectar and growth bonuses and your Min % target. It also pulls planters early when a nectar is about to overfill. It replaces the fixed Harvest Every hours value and cannot be combined with Full Grown.
How do I grow smoking planters for Puffshrooms with Natro Macro?
Use Manual mode and tick Disable Auto-Harvest for the slots you want to hold. The macro will place the planter but never harvest it, so you can check whether it is smoking. Harvest by hand, clear it in the timers window with F5 and press + to advance the cycle, or use ?planter harvest from Discord.
Why does Natro Macro say 3 Planters already placed?
The macro found three of your planters already in the ground when it tried to place another, usually ones you placed by hand or ones left over from another mode. It reduces Max Planters to cope. Harvest or clear those planters, reset Max Planters on the tab and let the macro place them itself.
Keep reading




