Natro Macro logoNatro MacroDownload

Guide

Natro Macro Patterns Explained: All 12 and When to Use Them

What each Natro Macro pattern really does with your movement keys, how Length and Width change it, which one to use in each field, and how to add custom patterns without risking your PC.

Natro Macro patterns guide with gathering routes drawn across a flower field
On this page
  1. How Natro Macro Patterns Work
  2. All 12 Natro Macro Patterns Compared
  3. Each Pattern Explained
  4. Length and Width Settings for Patterns
  5. Best Natro Macro Patterns for Each Field
  6. How to Add Custom Patterns to Natro Macro
  7. Are Custom Patterns Safe?
  8. Keeping Patterns When You Update
  9. Choosing Your Natro Macro Pattern
  10. FAQ

A pattern is the walking route Natro Macro repeats while you gather. It decides how much of the field you cover, whether you stay under your sprinkler and whether you slowly drift off the edge. Natro Macro ships with 12 patterns (you get them all with the Natro Macro download), and every one is a small AutoHotkey file in the patterns folder that you can open and read.

We read all 12 files line by line to write this guide. Below you will find what each pattern actually does with your movement keys, how Length and Width change it, which pattern the macro itself uses for each field, and how to add custom patterns safely. Pattern settings live on the Gather tab, so keep our Natro Macro gather settings guide open alongside this one.

How Natro Macro Patterns Work

Every pattern is written with four abstract direction keys rather than fixed W, A, S and D. By default "front" is W, "back" is S, "left" is A and "right" is D. The Invert F/B and Invert L/R checkboxes on the Gather tab swap those pairs, which mirrors any pattern without editing it. Rotate Camera turns the view before the pattern starts, which turns the whole route with it.

Three values reach every pattern:

  • size comes from the Length setting: XS = 0.25, S = 0.5, M = 1, L = 1.5, XL = 2. Distances in the pattern are multiplied by it.
  • reps comes from the Width setting (1 to 9). Most patterns use it as a loop count.
  • facingcorner is set to 1 for a few specific Pine Tree, Pineapple and Spider setups so patterns can adjust their first moves.

Distances are measured in tiles and converted to walking time using your Movement Speed from the Settings tab. While the pattern runs, the macro holds the mouse button down to collect pollen, checks your bag every second (the features overview lists everything else it watches) and repeats the pattern until a limit or interrupt ends the trip. Each cycle gets up to three minutes before the macro moves on.

All 12 Natro Macro Patterns Compared

PatternMovementWhat Width doesMacro uses it for
AurynFigure-eight loops plus wide circles, mirroredMore loops, each larger than the lastNo field default
CornerXSnakeCorner-start snake with diagonal crossings, one passTiny nudges onlyDefault for 14 of 17 fields
DiamondsDiagonal squares that grow each loopNumber of diamondsNo field default
ForkTight parallel forward/back lines like fork tinesNumber of tinesNo field default
LinesLong forward/back lines, sidestepping one tileLines each wayDefault for empty slots 2 and 3
SlimlineOne left-right sweep through the start pointAlmost nothingNo field default
SnakeLong left/right lines, stepping forward one tileLines each wayNo field default
SquaresSquares that grow by one tile each loopNumber of squaresFresh-install slot 1
StationaryStands still for 10 seconds per cycleNothingClover, Stump, Cactus
SuperCatNarrow vertical zig-zags drifting left, then rightZig-zag loops each wayNo field default
XSnakeSnake rows with diagonal X crossings, loopedFull repeatsNo field default
e_lolEvenly spaced comb or typewriter passesNumber of passesNo field default

Each Pattern Explained

Here is what every shipped pattern does, grouped by shape family, based on the actual movement commands in each file.

Squares

Squares walks front, left, back, right. Each side is 5 tiles times size plus the loop number, so the first square is slightly smaller than the second, and so on. With the default width of 3 you walk three growing squares per cycle, all sharing one corner at the start point. It is simple, predictable and easy to keep on a sprinkler, which is why it is the fresh-install default for slot 1.

Diamonds

Diamonds is Squares turned 45 degrees. It holds two keys at once (front-left, then front-right, back-right, back-left), with the same growing side length of 5 tiles times size plus the loop number. Because every leg is diagonal to the camera, it sweeps the field at a different angle from Squares while keeping the same compact footprint.

Lines

Lines walks 11 tiles times size forward, steps one tile left, walks back, steps left again. It repeats that for each width rep, then runs the same lines while stepping right, ending near where it started. The result is a tight band of parallel vertical lines. Lines is the macro's default for an empty slot 2 or 3, and it suits long, narrow fields when the camera is rotated to match.

Snake

Snake is Lines on its side. It walks 11 tiles times size to the left, steps one tile forward, walks right, steps forward again, then repeats the rows while stepping back toward the start. Choose Snake over Lines when the field is wider than it is deep from your camera angle.

XSnake

XSnake was added in v0.8.6 (credited to Zaappiix). Each rep walks rows 8 tiles wide with 2-tile steps between them, cuts back across the area on a long diagonal (the "X"), works through another set of rows in the opposite direction and finishes with a shorter diagonal. Because it changes direction often and crosses its own path, it spreads pollen collection more evenly than straight lines. Width repeats the whole route, so keep it low in small fields.

CornerXSnake

CornerXSnake is the corner-starting version of XSnake, added in the same release. It runs the route once per cycle instead of looping it, and width only adjusts a couple of short corrective steps. It is built to start from a corner sprinkler position, which is why the field defaults pair it with Upper Left, Upper Right, Lower Left and similar start locations. Fourteen of the 17 field defaults use it, so it is the pattern most players actually run.

Slimline

Slimline, another v0.8.6 addition by Zaappiix, walks 4 tiles times size left, 8 tiles right and 4 tiles back left. That is one horizontal sweep through the start point and back. Width adds only a tenth of a tile per rep, so treat Length as the only real control. It stays very close to your sprinkler, which makes it a sensible choice when you want to stay inside a saturator's reach.

SuperCat

SuperCat makes narrow zig-zags: a short step left (1.25 tiles times size), about 7 tiles forward, another short step, about 6.66 tiles back, and so on. One loop drifts the zig-zag left; the second loop mirrors it to the right. Width sets how many zig-zags run each way. Coverage is dense and the footprint is predictable, which suits mid-sized fields.

Auryn

Auryn arrived in v0.6.1, with the original author's note that it was "shaped like my discord pfp". The file's own comment calls the first section "infinity": figure-eight loops built from diagonal moves, followed by a big circle, a half-circle "flip" to the other side, a reverse infinity and another big circle. Every leg scales with both size and the loop number, so each rep is larger than the last. At high width it covers a lot of ground quickly, so use it only in large fields with Length S or M.

Fork

Fork came in v0.9.4 as the original author's "new custom pattern". It starts with a short diagonal, slides sideways to the edge of its area and then walks parallel forward and back lines spaced 0.75 flowers apart (the file says "flowers between lines"). Picture the tines of a fork. Width controls how many tines there are; Length controls how long they are. It also checks facingcorner and takes an extra step forward first in those setups. The very tight spacing makes it thorough in small areas.

Stationary

Stationary is a single line: wait 10 seconds. You stand still at the start point and keep collecting, and the pattern simply repeats until the trip ends. Drift Comp is skipped automatically for it because you never move. The field defaults use Stationary with Length S for Clover, Stump and Cactus, all with the sprinkler at Center.

e_lol

e_lol first moves to one side, then makes a run of evenly spaced passes: a small sidestep, a push forward, another sidestep and a walk back of almost the same length. It then returns and repeats the passes the other way. The effect is a comb or typewriter sweep with very regular spacing. The name links back to the "e_lol pine macro" mentioned in the v0.6.5 notes. Width sets the number of passes, and it adjusts slightly for facingcorner setups.

Length and Width Settings for Patterns

Length and Width interact differently with each pattern, so the same numbers do not mean the same thing across them.

  • Length is universal. Every moving pattern multiplies its distances by it. Going from M to L makes every leg 50% longer.
  • Width is pattern-specific. It is a loop count in Squares, Diamonds, Lines, Snake, XSnake, SuperCat, Auryn, Fork and e_lol, a small nudge in CornerXSnake and Slimline, and ignored by Stationary.
  • Growing patterns grow fast. Squares, Diamonds and Auryn add size with every loop, so width 6 at Length L can be far bigger than width 3 at Length M.
  • Longer cycles mean slower reactions. The macro checks interrupts while the pattern runs, but a huge pattern spends more time far from your sprinkler and your start point.

When you change a pattern, watch one full cycle with the Roblox window visible before walking away. If you end a cycle further from the sprinkler than you started, lower Length first, then Width, then try the Invert checkboxes.

Best Natro Macro Patterns for Each Field

The safest recommendation is the one the developers already built in. Pick a field on the Gather tab and the macro loads its tuned default. We only move away from it for a clear reason.

SituationPattern to tryWhy
Any field, first setupThe field default (CornerXSnake or Stationary)Tuned with matching sprinkler spot, camera and invert
Clover, Stump, CactusStationary, Length SThe shipped default for those fields
Supreme Saturator, want to stay closeSlimline or Squares at S/MSmall footprint around the start point
Large open fieldSuperCat, XSnake or AurynWide, even coverage
Long narrow fieldLines or Snake, with camera rotationLong straight legs along the field's length
Small area, thorough coverageFork or e_lolVery tight line spacing

Remember that quests, planters and boosted-field gathering use field defaults rather than your slot settings. If you find a better pattern for a field, save it with the field default icon on the Gather tab so those features use it too.

How to Add Custom Patterns to Natro Macro

Custom patterns are plain .ahk files. Since v1.0.0 they use pure AutoHotkey v2 syntax, and the macro loads every file in the patterns folder when it starts.

  1. Get the pattern from a verified source. Use the #patterns channel on the official Natro Macro Discord or the NatroTeam/Paths-Patterns repository, which describes itself as "a collection of patterns and paths confirmed to be safe by the developers of Natro Macro."
  2. Close Natro Macro with F3 and close the window.
  3. Copy the file into the patterns folder inside your Natro Macro folder. The file name becomes the pattern name in the dropdown.
  4. Run START.bat. For any pattern it has not seen before, the macro shows a security warning and then asks "Do you FULLY trust the pattern X and want to import it?" Answer Yes only if you got it from a source above.
  5. Pick it on the Gather tab and watch a full cycle before leaving it alone.

Behind the scenes the macro test-loads each new pattern with AutoHotkey's validator. If the file has an error you will see "Unable to import 'X' pattern!" with the error text, and the macro continues without it. Files written in the old pre-v1.0.0 format trigger "Pattern 'X' seems to be deprecated!" and will not work until the author updates them.

What pattern authors can use

If you write your own, open Squares.ahk as a template. Patterns can use the direction keys (TCFBKey, AFCFBKey, TCLRKey, AFCLRKey), the size, reps and facingcorner values, the Walk() function, camera keys added in v0.8.8 and nm_CameraRotation() from v1.0.0.3, which turns the camera back when the pattern ends. A pattern containing the comment ;@NoInterrupt asks the macro to let the current cycle finish before handling non-urgent interrupts. The hidden Advanced tab has a "Test Paths/Patterns" tool for repeated test runs; see our settings and hotkeys guide for how to open it.

Are Custom Patterns Safe?

Only when they come from a trusted source. A pattern is code, not a drawing. The macro's own warning says it plainly: "Pattern files can execute any AutoHotkey code, including potentially malicious code. You should only run patterns from sources you trust." In v1.1.0 Natro Team patched a vulnerability (GHSA-c5gm-vfvf-pwhx) where code inside a pattern could run, and added the import prompt you now see.

  • Never import a pattern a stranger sends you "to test". The warning calls this out specifically.
  • Prefer the verified repository and the Discord channel; both are reviewed.
  • Open any .ahk file in Notepad before importing. A real pattern is a short list of key presses and Walk() calls. Anything that downloads files, runs programs or reads your folders is not a pattern.

Our Is Natro Macro safe? page covers the wider picture.

Keeping Patterns When You Update

Imported patterns are stored in settings\imported\patterns.ahk alongside their hashes. When the auto-updater offers a new version it shows a "Copy Patterns" option, so your custom files move to the new folder. For major version updates copying paths and patterns is disabled and only your settings are guaranteed to transfer, so re-download patterns from the verified sources instead. The Natro Macro update guide walks through it.

Choosing Your Natro Macro Pattern

Start with the field default, change Length before Width, and use Invert and Rotate Camera before swapping patterns. Reach for SuperCat, XSnake or Auryn in big open fields, Stationary or Slimline when you want to sit on a Supreme Saturator, and Lines or Snake in long fields. Add custom patterns only from the verified Natro Macro sources, and check every cycle by eye the first time. If a pattern still walks you off the map, the troubleshooting guide covers movement speed and display problems that no pattern can fix.

Frequently asked questions

What is the best pattern in Natro Macro?

There is no single best pattern. The developers tuned a default for every field, and that default is the best starting point: CornerXSnake for 14 fields and Stationary for Clover, Stump and Cactus. Change it only for a reason, for example Slimline to stay on a Supreme Saturator or SuperCat to cover a large open field.

How many patterns come with Natro Macro?

Twelve: Auryn, CornerXSnake, Diamonds, Fork, Lines, Slimline, Snake, Squares, Stationary, SuperCat, XSnake and e_lol. They live as .ahk files in the patterns folder. An older pattern called Typewriter appears in early release notes but is no longer included. Custom patterns you import appear in the same dropdown on the Gather tab.

What do Length and Width mean for patterns?

Length (XS, S, M, L, XL) multiplies every distance in the pattern by 0.25, 0.5, 1, 1.5 or 2. Width (1 to 9) is passed to the pattern as a repeat count. Most patterns loop that many times, but CornerXSnake and Slimline only use it for small adjustments and Stationary ignores it completely.

Where do I put custom patterns?

Copy the .ahk file into the patterns folder inside your Natro Macro folder, then restart the macro with START.bat. For any new pattern it shows a security warning and asks whether you fully trust it. Approve only patterns from the official Discord's patterns channel or the NatroTeam/Paths-Patterns repository.

Why does Natro Macro say a pattern is deprecated?

The pattern was written in the old format used before v1.0.0, when the macro moved to AutoHotkey v2 and patterns switched to pure AHK syntax. A deprecated pattern will not work. Look for an updated version in the verified sources or ask the creator to update it.

Can a pattern harm my computer?

A malicious one could. Pattern files can execute any AutoHotkey code, which is why v1.1.0 added an import confirmation and fixed a related vulnerability. Use only verified sources, never import a file a stranger sends you, and open it in Notepad first. A genuine pattern is just key presses and walking commands.

Keep reading